Misreading holding tank sensors and level monitors are notorious for being one of the most frustrating fixes within the RV community. At one point or another, you have most likely had first hand experience with this issue.
In this article we will talk about why the sensors tend to fail, specifically inside your black water holding tank. Read this article if you're looking for information on how to clean and restore your gray tanks.
The majority of all sensor problems come from undigested waste and debris that get stuck on sensor probes, causing them to misread as full. Sensor probes are, typically, poor quality and it's very easy to get false readings if you aren't keeping the solids liquefied inside your holding tanks.
It is vital to the health of your sensors to have waste liquefied inside the holding tank so that solid chunks and debris don't build up on your RV level guages and probes. Unfortunately, many RV owners only consider toilet odors when they are purchasing their holding tank treatments and they don't select treatments that also effectively digest the solids inside their tanks. Or in some cases, don't use an RV toilet chemical at all. As a result, they are confused and frustrated when they get a clog or misreading tank sensors.
So, the first step to ensuring your black water tank sensors remain in good operating condition is to use a high quality waste digesting tank treatment.
One thing to note before we get started, if your sensors are broken you will need to install new sensors for your RV black or gray tank. The tips and recommendations we outline below will help you clean your misreading sensors but no amount of cleaning will fix a broken sensor. That being said, we recommend you try cleaning your holding tank tank monitors before you replace them. It is hard to tell what exactly is going wrong with an RV sensor issue, so before you spend big bucks replacing your sensors, try cleaning them. But remember, if you can't get your RV sensors to work properly after you have followed the steps below, you probably have sensors that are either broken or unrepairable and you will need to replace them.
If you routinely struggle with keeping your sensor probes in good operating condition you may want consider installing tank level monitors that are mounted on the exterior of your tank, like these SeeLevel RV Tank Sensors. Aftermarket sensors like this are a great option if you want more/better information on tank levels and are tired of struggling with OEM sensors that can malfunction consistently.
There are three major types of sensor treatments that are used to clean up and restore misreading black water tank sensors.
We'll go through each of these types.
Bacteria and enzyme sensor cleaners are often a very effective option for restoring your RVs holding tank level gauges. These products introduce safe bacteria to your black water holding tanks that produce enzymes. These enzymes break down the waste that is coating your RV tank level monitos so it can easily be rinsed off the probes. After the enzymes have broken the waste down, the bacteria literally eat the waste, completely liquefying the solid waste. Boom, no more sensor problems. And it's totally safe for people, pets, and the environment.
We believe, wholeheartedly, that the best RV sensor cleaner available is Unique RV Sensor Cleaner. Quite simply, it's the strongest, most advanced formula available today. Our blend of premium waste digesting microbes will work quick to get the job done and our boosted enzymes are the best of the best, so you know with 100% assurance that when you are using Unique Sensor Cleaner there is NOTHING stronger on the market!
Since we have covered bacteria/enzymes, lets talk about chemical options for treating faulty sensors.
Another option for cleaning your sensors, which might seem extreme - but is often times recommended in RV user manuals that come from the manufacturer - are drain line cleaners, like Liquid Plumr or Drano. Caustic drain cleaners use ingredients like Lye (sodium hydroxide), Bleach (sodium hypochlorite), or Potassium Hydroxide to physically burn away the debris that is stuck on the probes. All of these ingredients (and 99% of the major brands of drain openers that contain them) are very dangerous to people, pets, and septic systems, which is a HUGE drawback. They are, however, fairly inexpensive and, in some very extreme cases, the only thing strong enough to get the job done.
Though caustic chemicals can be a very effective solution for misreading tank sensors, you will have to decide whether it is worth the risk to use dangerous chemicals to treat your RVs holding tanks. It could result in danger to you and your family as well as the environment. It can also cause significant damage to your RV.
It is our recommendation that you avoid this treatment process, unless you are desperate - in which case you could just safely replace your sensors with external holding tank sensors. But you don't have to take our word for it. It comes down to a matter of personal preference, taste, and what you think will work best for you and your RV.
Now, let's look into Surfactants!
Surfactants is just a fancy way of saying soaps, and they are often used to scrub the inside of your RV's holding tanks. They are also usually combined with other products as soap isn't usually strong enough to effectively clean sensor probes. One of the common ways they are used is with a process called the Geo Method. To learn more about cleaning your RV holding tanks using the Geo Method click here.
The Geo Method is normally a combination of Calgon and dish detergent/laundry detergent. Calgon is a water softener that makes the surfaces of your tank slick so the waste and other debris that typically get stuck on tank walls and RV tank level sensors can slide off. The soap from the laundry/dish detergent supposedly penetrates waste on the walls and sensors on your holding tank and effectively cleans all the residual waste off, fixing your issue. This is a popular treatment method within the community for dealing with sensors, but may take a little time to work so be patient.
The Geo Method can be a bit of a science experiment and you will probably end up playing around with it a lotto get the ratios right, measuring and deciding how much you should use for a sensor cleaning.
Now that you understand the reasons why your sensors are misreading it's time to clean them up and restore them back to their original working condition!
In this article, we have spoken a lot about restoring the sensors in your RV's black water tanks, but what about the gray tank? Believe it or not, restoring gray tank sensors are a completely different thing. Learn how to clean and restore your malfunctioning gray tank sensor probes in this helpful and informative article.
There are many options when it comes to treating your RV sensors and it can be a major pain to figure out which one works for you. Obviously, we believe that the most effective, safe, and convenient way to clean up and restore sensors is by using a good bacteria/enzyme cleaner, like Unique RV Sensor Cleaner, but ultimately the choice is yours in how you tackle this common problem.
We hope that this has helped shed some light on this tricky problem! If you have any questions that weren't covered here, email us! We'd love to hear from you!
Follow us on Social Media and get access to discounts, promotions, and savings that aren't available on our website or emails!
To get started, message us on Facebook and we will send you a $5 off coupon code - all you have to do is Like our page!